where to find Camber plates?

[5speedcobra]

I'm looking to buy some camber plates for my tona, but am having a toiught time. Any ideas as to where I could get my hands on some?

[LancerShelby]

They're called "camber" plates not chamber. I edited if for you.
How much can you get with the stock setup?

[83rampage]

http://www.turbo-mopar.com/forums/index.php

Find a user named "RBryant". He makes them. I think he is in Phoenix.

[5speedcobra]

I am slowly learning now that they might not be necessary... learning curve. haha

[LancerShelby]

So do you know what to set your alignment at? You could easily get away with -1.5 camber or more in the front, but I'm not sure how far you can go with the stock stuff. Do you have an adjustable rear track(panhard) bar?

[shancerlelby]

rich's look really well built, altho T3 makes a great setup for the corolla that could be redrilled to fit our cars. the price savings might be worth it if your cheap like the rest of the turbododge world.

http://www.technotoytuning.com/productdetail.php?p=816

just an idea.

[turboshad]

So do you know what to set your alignment at? You could easily get away with -1.5 camber or more in the front, but I'm not sure how far you can go with the stock stuff. Do you have an adjustable rear track(panhard) bar?

With my coilovers and no camber plates -1 is about the most I can get on the front.

[5speedcobra]

i'd like to go to -1.5 on the front...and I think the stock set up should allow for that.

FOr the back, no, I do not have and adjustable track bar. I was thinking i'd make one, but don't know where to find those special end links that thread into the pipe?
I might jsut order if off that guys site. http://www.csracer.com/panhard.html

[turbominivan]

^ princes auto. you can buy adjustable end links like that and make a bar REALY easy.

[5speedcobra]

really? holy crap! what would I use to make a thread inside the pipe?